Find 8f Magnesium Oxide Board, Mgo Construction Board, Mgo Panel Boards on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Thin wall container mould > 8f reinforced magnesium oxide board of high strength

8f reinforced magnesium oxide board of high strength

  • 8f reinforced magnesium oxide board of high strength
  • 8f reinforced magnesium oxide board of high strength
  • 8f reinforced magnesium oxide board of high strength
  • 8f reinforced magnesium oxide board of high strength

8f reinforced magnesium oxide board of high strength

    Payment Type: L/C,T/T
    Terms of Trade: FOB,CFR,CIF,EXW
    Min. Order: 400 Piece/Pieces
    Delivery Time: 25-35 Days
    Packaging: pallets
    Productivity: 150,000pcs per month
    Brand: Support OEM
    Transportation: Ocean,Land
    Place of Origin: China
    Supply Ability: 150,000pcs per month
    HS Code: 6811899 681182
    Port: Qingdao ,Tianjin ,Shanghai

Product Description

What is mgo board?

The Great Wall of China and the Roman Empire represent the first uses of magnesia mixed into mortar. By the 20th-century, the use of magnesia declined as builders turned to cheaper options such as Portland cement and other such materials.

Over the past two decades, however, magnesia has returned as a component found in sustainably produced magnesium oxide boards. Several states encourage and approve of builders using magnesium boards because they combine strength and versatility with sustainability and recyclability.

Magnesium oxide boards offer replacements for gypsum-based panels, drywall, and other construction boards and panels. They are environmentally benign and boast a host of characteristics beneficial to the safety and health of homeowners and contractors.

Still, not all that many consumers have heard of magnesium board or understand its outstanding features and environmental attributes. It’s a bit of a mystery, and only a small number of websites have much information about magnesium oxide boards.

4 multiply 8 magnesium oxide board

4 multiply 8 magnesium oxide board


Material Comparison


Product

MgO Sulphate

Fiber Cement

MgO Standard

Gypsum Board

OSB/Plywood

Weight

Low

High

Low

Low

High

Fire Resistant

Excellent

Good

Good

Poor

Poor

Water Resistant

Excellent

Good

Good

Poor

Poor

Mould/Insect Resistant

Excellent

Good

Excellent

Poor

Poor

Flexibility

Excellent

Poor

Excellent

Poor

Poor

Fasten Strength

Excellent

Poor

Excellent

Poor

Excellent

Environmental

Good

Asbestos Risk

Good

Poor

Good

Chloride %

None

Yes

High

None

None

Cutting

Saw cut

Cutting Machine

Saw Cut

Saw Cut

Cutting Machine


Product application

Belgium villa

4 multiply 8 reinforced magnesium oxide board of high strength

Belgium interior decoration details

4 multiply 8 reinforced magnesium oxide board of high strength


Packaging & Shipping

Sea-worthy pcakages on pallets,strapping with PE ropes and films.

mgo panel boards


Why Choose Us

* Self-developed Automatic MgO Board Production Line
* Excellent Customized Ability

* We can customize boards based on customer needs.

* Perfect free sample (customer needs to pay the freight only)

* We are confident to provide you with good quality testing samples,which will lead you to place a trail order.
* Fast and stable delivery time

* As for one 20ft/40ft container’s goods,the lead time is about 21-28 days.


Exhibition

mgo construction

4 multiply 8 reinforced magnesium oxide board of high strength

Q1: How Are MGO Boards Produced?

A1: Most magnesium carbonite comes from China and Europe. The process combines magnesium and oxygen with pressure and heat to create magnesium oxide (MgO). The MgO has the characteristics of stone after heating. After being ground into powder, it gets mixed with water, chloride, and sulfate (or Epsom salts) and wood dust (cellulose), perlite, and a handful of other materials.

Q2: How do you store MgO Boards?

A2: MgO can be stored easily indoors. It is highly resistant to moisture, and humidity making it easy to store. MgOshould be stored inside in a cool dry place as with any sheet building material. To protect the edges and corners, carry boards on their side. Stack boards flat on dunnage, loose wood, matting or other material and not directly on the ground. Do not allow MgO to bow. Do not stack any other materials on top of MgO. Before installing MgO acclimate the panels for 48 hours in the room where they will be installed.

Q3: What are my options for finishing MgO Panels?

A3: Finish MgO with most products such as paint, stucco, synthetic stucco, wallpaper, plaster, stone, tile, brick and much more. The strong adhesion properties of MgO also make it a perfect product for Structural Insulated Panels (SIPS), Exterior Insulated Finish Systems (EIFS) and interior wall systems using fabrics.

To finish MgO Panels after installation, begin with a primer. This is required because MgO panels are alkaline in nature. We recommend using a primer that is suitable for concrete or masonry. There are a few popular brands of paint which react molecularly with the cement in MgO forming a UV highly resistant coating that will last for years. Acrylic stucco topcoats or polymer modified cement base coats can also be used and individually applied to the board. Test the topcoats and paints prior to completing the entire project. To properly test the bonding capability of the topcoat, brush on or spray a small area of the MgO with paint, let the board dry and cure. Then make an X with a sharp razor knife, apply masking tape over the cut and press firmly and rip it off like a band-aid. If the paint stays on the board, this indicates the paint and board have a successful bond.

Q4: What do I use to fill in joints between MgOs?

A4: When installing panels, leave a 3 to 6mm wide gap between the panels. Control the depth of the gap using polyethylene backer rods to the point where the width is greater than the joint depth. Use non shrinking paintable caulk applied with a caulk gun, then smooth off excess caulk using a little water and your finger or a caulk smoothing tool. Add a coat of primer when the caulk is cured. After priming, apply a thin coat of spackle or gypsum mud to remove any joint telegraphing. The outside corners of the boards can be glued, sanded or routed smooth and flush and filled with caulk, plaster or grout. Use glue on the inside corners of the boards or butt joint with a bead of painter’s caulk.

The outside corners of the joints can be butted together and then sanded smooth. For a bull nose finish, corners can be routed or mitered. Adding a corner bead of caulk is optional. MgO bonds well to itself, metal, wood and other materials. Apply adhesive to the corner board joints using using ChemLink M1 or a moisture cure urethane adhesive. Review the caulking chart for other tested products.

reinforced magnesium oxide board






Shangdong Lanchuang Economy and Trade Co.,Ltd.

 

Shandong Lanchuang Economy and Trade Co., Ltd. was founded in 2012. We focus on MgO board business. We are the export agent of China Magnesite & Material Association, and the buying agent of Magnesium Oxide Cement Association(MOCA). We are a member company of Shandong Fairyland Infrastructure Group.Shandong Fairyland Infrastructure Group Co.,Ltd. has a history of 27 years in real estate development business.


Shandong Lanchuang Economy and Trade Co.,Ltd. is the executive director company of China Magnesite Materials Association(CMMA).It works as exporting and international exchange platform for the magnesite industry in China.It was appointed by CMMA the export agent for our members. Shandong Lanchuang Economy and Trade Co.,Ltd. is responsible for the international exchange,resources docking and product exporting for CMMA members.Our products for exporting are new environment-friendly building materials represented by MGO BOARD.

In recent years,Shandong Lanchuang has organized our CMMA members to investigate the foreign markets in the US,Canada,Australia,Germany,Sweden and Japan,and has been connected with the governments,counterpart associations,research institutes and importing enterprises in these areas.At present,Lanchuang has established good economic and trade contacts with the US,Canada,Australia,Japan and Germany,and exported the products to some of the above regions. It has accumulated a high reputation and has been widely praised by the domestic and international circles.

As a member company of Shandong Fairyland Infrastructure Group.,Shandong Lanchuang Economy and Trade Co.,Ltd. is the platform for the integration of economic and trade business resources of the Group Company.Since its foundation ,the company has been adhering to the business philosophy of providing continuous,high quality service and quality information to customers,and to our company spirit of sincere commitment ,pragmatism and innovation.

Company Info

  • Company Name: Shangdong Lanchuang Economy and Trade Co.,Ltd.
  • Representative: Xiaojing Yang
  • Product/Service: MgO Exterior Wall Board , MgO Interior Wall Board , MgO Ceiling Board , MgO Flooring , MgO Decorative Board , MgO Board
  • Capital (Million US $): 10,000,000RMB
  • Year Established: 2012
  • Total Annual Sales Volume (Million US $): Below US$1 Million
  • Export Percentage: 91% - 100%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 1
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 30,000-50,000 square meters
  • Factory Location: Jiangsu Province,China
  • Contact Person: Ms. Amy Zhang
  • Tel: +86-0531-85188790
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters